Richard Hash
08-17-2015, 6:15 PM
I had to drive 10 hrs total to pick them up, but think it will be worth it. I don't recommend driving a rental box truck on I-10 during rush hour thru Houston.
One PC 60-gal air compressor, as far as I can tell it's in great shape. One Grizzly G0453Z 15" planer (with spiral head), also in great shape. $1250 for both, but then another $180 in liftgate rental (thank God for hydraulics) and gas to get it home.
The only thing I could find wrong with the planer (besides the transmission oil being a bit low) was that the original owner never bothered leveling the extension wings, the wings set screws were totally missing. So each wing dropped about 3/16" of an inch. A couple hours of cleaning, lubing and calibrating, and it seems to run fine. I'm looking forward to the spiral head!
Now if the weather would just cool down a bit so being in the garage isn't quite so miserable!!
319804
319805
One PC 60-gal air compressor, as far as I can tell it's in great shape. One Grizzly G0453Z 15" planer (with spiral head), also in great shape. $1250 for both, but then another $180 in liftgate rental (thank God for hydraulics) and gas to get it home.
The only thing I could find wrong with the planer (besides the transmission oil being a bit low) was that the original owner never bothered leveling the extension wings, the wings set screws were totally missing. So each wing dropped about 3/16" of an inch. A couple hours of cleaning, lubing and calibrating, and it seems to run fine. I'm looking forward to the spiral head!
Now if the weather would just cool down a bit so being in the garage isn't quite so miserable!!
319804
319805