Bruce Jones
08-17-2015, 3:03 PM
I needed a break from gluing up segmented pieces so I threw a Teak blank up on the lathe to see if I could cut a really thin bowl; for those of you that
haven't turned Teak it's a bit different than other woods, Better be able to sharpen your tool very well.
This was out of the same board I cut the Fiesta Bowl from. there's a check in the wood I hit that w/ thin CA Glue before starting.
Bruce
haven't turned Teak it's a bit different than other woods, Better be able to sharpen your tool very well.
This was out of the same board I cut the Fiesta Bowl from. there's a check in the wood I hit that w/ thin CA Glue before starting.
Bruce