11" Sapele inlay Sun Tray

[Bruce Jones]

Hello once again this piece I just finished this morning I'm trying new ideas and this is what I came up with.
A 11" Sapele tray w/a Tiger Maple sun inlay; this was all hand done on a band saw & w/ a hand held router.
It's not perfect like a C&C router would give you, but I'm all about hand made; And a C&C is Not in my budget anyway.

This is my version of a Native American Sun Symbol I hope you guys like this one,

Bruce

[Joe Kieve]

Beautiful Bruce!

[Roger Chandler]

Love the curl in that wood, and the inlay is nice as well. You seem to be enjoying this new world of spinning wood! Nicely done, Bruce!

[Brian Myers]

Bruce your work is nice and you really are a busy little bee. You must be having a ton of fun with all the work you keep showing. Keep up the good work.

[Bruce Jones]

Thank you Joe, Roger and Brian yes I'm staying very busy and still have a great deal of wood to make more projects
So many ideas so little time!

Bruce

[Allan Wright]

That figure in BOTH pieces of wood - so fantastic. Lovely piece.

[Alan Arnup]

Well that is certainly different - well done!

[Bruce Jones]

Thank you Alan that's what I'm shooting for.

[Bruce Jones]

Hello Once again I had a few hours today to put the final finish on this piece.
After letting the Tung Oil dry for a few weeks I sanded it w/ 220 and applied several coats of Deft Sanding Sealer sanding in between coats; then w/ a rattle can Deft clear gloss Lacquer I sprayed the finish, it's now ready for the customer to pick up.

Bruce