View Full Version : 11" Sapele inlay Sun Tray
Bruce Jones
08-16-2015, 1:04 PM
Hello once again this piece I just finished this morning I'm trying new ideas and this is what I came up with.
A 11" Sapele tray w/a Tiger Maple sun inlay; this was all hand done on a band saw & w/ a hand held router.
It's not perfect like a C&C router would give you, but I'm all about hand made; And a C&C is Not in my budget anyway.
This is my version of a Native American Sun Symbol I hope you guys like this one,
Bruce
Joe Kieve
08-16-2015, 2:51 PM
Beautiful Bruce!
Roger Chandler
08-16-2015, 3:23 PM
Love the curl in that wood, and the inlay is nice as well. You seem to be enjoying this new world of spinning wood! Nicely done, Bruce!
Brian Myers
08-16-2015, 7:52 PM
Bruce your work is nice and you really are a busy little bee. You must be having a ton of fun with all the work you keep showing. Keep up the good work.
Bruce Jones
08-16-2015, 10:37 PM
Thank you Joe, Roger and Brian yes I'm staying very busy and still have a great deal of wood to make more projects
So many ideas so little time!
Bruce
Allan Wright
08-17-2015, 2:30 PM
That figure in BOTH pieces of wood - so fantastic. Lovely piece.
Alan Arnup
08-17-2015, 7:26 PM
Well that is certainly different - well done!
Bruce Jones
08-18-2015, 12:16 AM
Thank you Alan that's what I'm shooting for.
Bruce Jones
09-25-2015, 11:44 AM
Hello Once again I had a few hours today to put the final finish on this piece.
After letting the Tung Oil dry for a few weeks I sanded it w/ 220 and applied several coats of Deft Sanding Sealer sanding in between coats; then w/ a rattle can Deft clear gloss Lacquer I sprayed the finish, it's now ready for the customer to pick up.
Bruce
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.