Delta 34-985 and Grizzly Power Feeder Parts

[Anthony Whitesell]

I recently acquired a Delta 34-985 Power Feeder at auction. It is supposed to have two sets of gears, but I only have the set that is installed (34T and 16T). I am missing the 24T and 26T gears. I was lucky once to purchase replacement parts for my rigid oscillating spindle sander via Grizzly. Is anyone familiar enough with this power feeder and those from Grizzly, to know a cross reference part from Grizzly?

So far I have found a Grizzly G1778 feeder on ebay that looks very similar to the Delta. I have also found the Grizzly 1/4HP G4176 that has 24T and 26T gears. But in either case, I'm trying to find confirmation they will fit and work on the Delta. Anyone have any ideas, help, comments?

[Anthony Whitesell]

OR does anyone have a Grizzly Power Feeder that they would not mind providing some measurements from?

I think I would need:
-Tooth count and diameter
-outside distance of two mated gears
-outside distance of the two gear shafts
-shaft diameter