Sometimes turning comes easy

[Bob Bergstrom]

Turned some really friendly ash and cherry. Roughed the out in the middle of March and sealed the end grain and threw them in the garage. Air dried nicely and total time turning and power sanding was about 2 hours each. Ash plate was finished with oil, black wax rubbed into the grain and sprayed with two coats of Mohawk rattle can pre cat lacquer. Cherry were oiled and lacquered. Largest is 13" x 3". Others are about 11".
318966318968318970

[daryl moses]

Very nice!! Love the grain in the cherry.

[robert baccus]

Very, very nice and pro looking.

[Randy Red Bemont]

That cherry looks awesome. Great job.

Red

[Pat Scott]

Agreed, pic #4 is awesome. Love the Cherry figure. Oh yeah, the plate is nice too! :)

[Brian D Wood]

Very nice!