PDA

View Full Version : A push stick for the bandsaw that you'll never be without



Marty Backe
07-29-2015, 2:31 AM
My bandsaw push stick, creating after reading the October 2014 issue of Fine Woodworking


https://www.youtube.com/watch?v=CE-j2lZxjig

Jay Aubuchon
07-29-2015, 3:50 PM
Good idea. Thanks for sharing that.

Howard Pollack
07-30-2015, 9:56 AM
It is a good idea! Thanks. -Howard

John T Barker
07-30-2015, 11:33 PM
By comparison to where I put my push stick for my table saw I would consider that a little difficult to reach easily. I think I would rather it be hanging. Vibration is probably also going to let it move forward or back.

Dan Milosch
07-20-2020, 9:29 PM
I use velcro to hold my pushstick onto the bandsaw. Easy to grab.

David Bassett
07-20-2020, 10:08 PM
I use velcro to hold my pushstick onto the bandsaw. Easy to grab.

You realize this is five years old. Right?

Brian Deakin
07-26-2020, 1:41 PM
Please the video below from 9 minutes 20 seconds This is the best aid I have seen

https://www.youtube.com/watch?v=zNmaJfYmYxo&t=562s

Lee Schierer
07-28-2020, 3:46 PM
Put a rare earth magnet in the finger hole and hang it on the upper wheel cover. It would be at eye level and still available if you ate using the miter slot.