Logan Wittmer
07-14-2015, 9:31 AM
Hi Guys -
Just bought a laser for our production facility from a member on this board (Thanks Bill!). Bill supplied a submersible pump, however I am looking to switch out the pump to an inlet/outlet style so I can just drop a couple hoses into my jugs of distilled water. The pump that was supplied is listed as a LifeTech AP3500 (Qmax output: 2400L/HR or roughly 635G/hr). From the suggestions I am reading, this seems on the high end of the suggested output. I do have a pump here that is 720Gph. What is the suggested range for cooling water flow? It is a G Weike Storm 500 40W laser.
Just bought a laser for our production facility from a member on this board (Thanks Bill!). Bill supplied a submersible pump, however I am looking to switch out the pump to an inlet/outlet style so I can just drop a couple hoses into my jugs of distilled water. The pump that was supplied is listed as a LifeTech AP3500 (Qmax output: 2400L/HR or roughly 635G/hr). From the suggestions I am reading, this seems on the high end of the suggested output. I do have a pump here that is 720Gph. What is the suggested range for cooling water flow? It is a G Weike Storm 500 40W laser.