View Full Version : Froze Up Bearing on Router Bit
George Bokros
07-12-2015, 5:06 PM
Is there anything that can be done to free up the bearing or do I just need to replace it?
Thanks
Jerome Stanek
07-12-2015, 5:16 PM
just replace the bearing easy job. I keep a supply of bearings just for that or when they get a little sloppy
Brian Henderson
07-12-2015, 7:10 PM
You can probably soak it in Liquid Wrench or something similar but it's easier to just replace it and not have to worry about it.
glenn bradley
07-13-2015, 12:29 PM
Just replace it. Buy a variety whie your at it since buying one form a "router bit bearing" source is usuallyexpensive enough to buy a few at a bearug supply. I use a drop of very light machine oil on the bearing before putting the bit aay each time. I haven't killed a bearing ever since starting this habit.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.