Steve Holmquest
07-02-2015, 10:09 PM
Like many others before me, I have a delta drum sander (18/36 width) with a stripped gear in the belt drive. I have not seen anyone locate the gear, but thought I'd ask again.
one the bright side, I found a gearmotor that appears to be a fit from Von Weise in Michigan. It runs around $200 compared to pushing $400 for the delta.
http://estore.vonweise.com/parallelouputshaftv00212av402z7941lpu5014q407-0056-3-1-1-1.aspx
If I cannot locate the gear, it's off to Eaton Rapids to compare and hopefully purchase this motor.
any help is appreciated.
steve
one the bright side, I found a gearmotor that appears to be a fit from Von Weise in Michigan. It runs around $200 compared to pushing $400 for the delta.
http://estore.vonweise.com/parallelouputshaftv00212av402z7941lpu5014q407-0056-3-1-1-1.aspx
If I cannot locate the gear, it's off to Eaton Rapids to compare and hopefully purchase this motor.
any help is appreciated.
steve