Agazzani NRA Model 500 bandsaw 1987

[Graham Hawtree]

Hi Fellow wood workers,i have just purchased 1987 NRA 500 Bandsaw,which has come out of school woodwork room and is very good order,BUT who ever took the saw out for some reason has disconnected some of the wiring.I am wondering if by any chance someone may know or have a diagram of the wiring layout for this machine its 3 phase 400volt motor.The fence and mitre square are also missing,so would appreciate being pointed in the right direction to locate replacements for those as well.many thanks Regards Graham in New Zealand.

[Jim Andrew]

Can't help, but congratulations on getting a great bandsaw.

[Andrew Hughes]

This is the only source I know of for Agazzani info.Ask for Jesse
://www.eagle-tools.com/

[Graham Hawtree]

Hi Jim thanks for your comments its a great machine alright and in surprising good order considering it was made in 1987 but I suspect being in a school it has not done that much work,cant wait to get it going wish me luck cheers Graham.

[Graham Hawtree]

Thanks Andrew I will chase this up and see if they can help, appreciate your response cheers Graham.