View Full Version : Infinity Resaw Bandsaw Blade
charlie kapper
06-15-2015, 8:00 PM
I have a Laguna LT16 bandsaw. I want to try an Infinity Re-saw bandsaw blade. My bandsaw takes a 130 inch blade. The Infinity offers a 125 and a 131 1/2" blades. Will the 131 1/2" work. I don't want to have to send a blade back because it's too big.
Jebediah Eckert
06-15-2015, 8:26 PM
I think you need a 130" blade? I never heard of a range of sizes, you buy what it takes.
Jamie Buxton
06-15-2015, 8:38 PM
Call Infinity to get them to make you a blade the size the saw wants. Especially in the larger saws, custom blades are common.
Peter Kelly
06-15-2015, 8:42 PM
You might try the Bladerunner ones from Louis Iturra. These are the same as he Woodslicer but a little less expensive. He'll weld any length you need.
Iturra Design
(904) 642-2802
Tim Bridge
06-15-2015, 9:27 PM
I have had good luck with the Laguna blades.
The Resaw King is pricy, but the Shear Force blades are close to the Infinity blade you were looking at for $45.
http://www.lagunatools.com/accessories/Shear-Force-1-X-3-4-TPI/1-X-3-4-TPI-X-130
You might want to give it a look if you want an off the shelf 130" blade.
Sam Puhalovich
06-16-2015, 6:23 AM
I have a LT-16 ... and I'm pretty sure that the blade length is 145" ... better check before you order anything.
edit: Oops ... sorry 'bout-that ... I have a 'HD' 16 ...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.