Michael Moscicki
06-09-2015, 9:45 PM
I am looking at buying a complete router table package and have some questions. I am trying to decide between a Kreg package or Woodpeckers package and Woodpeckers lift vs Jessem lift. I have read numerous threads, and the impression that I get is that I can't go wrong with either system and will be happy with whatever I choose.
1) Kreg fence or Woodpeckers fence? The Kreg fence rides using a T-square system like a table saw. The Woodpeckers rides on two t tracks. The Kreg comes with a micro adjust built in, whereas the micro adjust for the Woodpeckers is $81 more although more robust.
2) I currently have a Bosch 1617 EVS and was wondering if the PC 75182 will be a noticeable upgrade over the Bosch other than the fact that it will save me from having to remove the Bosch for handheld use?
3) Woodpeckers PRL V2 or Incra version of the Jessem Mast-R Lift II? Is this another coin toss like the fence? In the videos of the Mast-R Lift II, I have seen them able to raise and lower the bit pretty quickly making me wonder if the speed of the Woodpeckers quick lift wrench is that noticeable. I can get the PRL V2 for $315 and the Incra Mast- R Lift II for $300.
The chart that Incra provides gives the edge to Mast-R Lift II. Also with the Mast-R Lift II, I would not have to buy adapter plates if I stick with the 1617 for now and decide to buy a 75182 at a later date.
http://incra.com/info/LiftComparison_042111.pdf
4)I can get a complete Kreg package(fence, top with insert plate and levelers, stand) for $589 with accessories such as featherboards, casters, on/off switch, fence stop, setup bars, etc. It becomes either $889 or $904 with lift.
http://www.hardwaresales.com/innovative-products/kreg-pocket-hole-jigs-and-woodworking-systems/the-kreg-prs1045-krs1035-prs1025-prs1015-router-table-with-caster-switch-bars.html
A comparable(not really, but close enough) Woodpeckers package(fence, top with PRL V2 lift, stand with casters) from the great folks at Carbide Processors is $826 with add-ons such as featherboards, micro adjuster, and reducer rings. No on/off switch or fence stop.
I imagine the fence would be the deciding factor in which package to buy.
I know I'm asking for advice, but research tells me I would be happy with the Kreg package for $589 plus Incra version of the Jessem Mast-R Lift II for $300 and sticking with my Bosch 1617 EVS.
I have an Incra miter gauge, Kreg pocket hole jig, and Woodpeckers measuring tools, so I am not partial to any brand if it matters in the decision making process.
1) Kreg fence or Woodpeckers fence? The Kreg fence rides using a T-square system like a table saw. The Woodpeckers rides on two t tracks. The Kreg comes with a micro adjust built in, whereas the micro adjust for the Woodpeckers is $81 more although more robust.
2) I currently have a Bosch 1617 EVS and was wondering if the PC 75182 will be a noticeable upgrade over the Bosch other than the fact that it will save me from having to remove the Bosch for handheld use?
3) Woodpeckers PRL V2 or Incra version of the Jessem Mast-R Lift II? Is this another coin toss like the fence? In the videos of the Mast-R Lift II, I have seen them able to raise and lower the bit pretty quickly making me wonder if the speed of the Woodpeckers quick lift wrench is that noticeable. I can get the PRL V2 for $315 and the Incra Mast- R Lift II for $300.
The chart that Incra provides gives the edge to Mast-R Lift II. Also with the Mast-R Lift II, I would not have to buy adapter plates if I stick with the 1617 for now and decide to buy a 75182 at a later date.
http://incra.com/info/LiftComparison_042111.pdf
4)I can get a complete Kreg package(fence, top with insert plate and levelers, stand) for $589 with accessories such as featherboards, casters, on/off switch, fence stop, setup bars, etc. It becomes either $889 or $904 with lift.
http://www.hardwaresales.com/innovative-products/kreg-pocket-hole-jigs-and-woodworking-systems/the-kreg-prs1045-krs1035-prs1025-prs1015-router-table-with-caster-switch-bars.html
A comparable(not really, but close enough) Woodpeckers package(fence, top with PRL V2 lift, stand with casters) from the great folks at Carbide Processors is $826 with add-ons such as featherboards, micro adjuster, and reducer rings. No on/off switch or fence stop.
I imagine the fence would be the deciding factor in which package to buy.
I know I'm asking for advice, but research tells me I would be happy with the Kreg package for $589 plus Incra version of the Jessem Mast-R Lift II for $300 and sticking with my Bosch 1617 EVS.
I have an Incra miter gauge, Kreg pocket hole jig, and Woodpeckers measuring tools, so I am not partial to any brand if it matters in the decision making process.