Michael McDuffie
08-13-2005, 10:22 PM
Every now and then, I have a BMP or JPG refuse to engrave properly. I either get false data or the art work is repeated 5 or 6 times, shifting to the right about 1/2" each time.
Yesterday, it happened again and while goofing around I turned vector off in the print driver. It works now!
I'm still using Win98 and the old driver so I may be the only one with this problem but just in case, thought I'd share.
Michael
Yesterday, it happened again and while goofing around I turned vector off in the print driver. It works now!
I'm still using Win98 and the old driver so I may be the only one with this problem but just in case, thought I'd share.
Michael