steven c newman
06-07-2015, 11:00 AM
Maybe. In the midst of all that rust hunting, found a strange little screwdriver
315225
Well, first off, that happens to be the longest #2 Phillips tip I have ever seen. 8" long!
Ok, back to that wee one. Rumour has it that it is a Goodell Pratt 3" screwdriver. For slotted head screws. Even has a bit of knurling on the shaft. Doubt it that is original, might be by Visegrip Jaws.
Little metal band is Brass, has quite a bit of letters stamped into it,too. Any ideas on this little fellow?
The other two came from a tool box I picked up (barely, as it was FULL) For some reason, I happen to like that style. Will add them to my growing collection.....
The little one ( GP?) came from a pile of old plumbers tools
315226
These are the best of the bunch. He also had a 16oz hammer head, and a hatchet head. Bits, screwdriver and the two heads cost me $2.
So, anybody ever see a little driver like that? :confused:
315225
Well, first off, that happens to be the longest #2 Phillips tip I have ever seen. 8" long!
Ok, back to that wee one. Rumour has it that it is a Goodell Pratt 3" screwdriver. For slotted head screws. Even has a bit of knurling on the shaft. Doubt it that is original, might be by Visegrip Jaws.
Little metal band is Brass, has quite a bit of letters stamped into it,too. Any ideas on this little fellow?
The other two came from a tool box I picked up (barely, as it was FULL) For some reason, I happen to like that style. Will add them to my growing collection.....
The little one ( GP?) came from a pile of old plumbers tools
315226
These are the best of the bunch. He also had a 16oz hammer head, and a hatchet head. Bits, screwdriver and the two heads cost me $2.
So, anybody ever see a little driver like that? :confused: