View Full Version : flute master
jeff oldham
06-07-2015, 10:26 AM
Does anyone know where i can purchase a flute master for putting flute on turnings,,,Or anything simular,,,Or anyones experiences on doing this,,thank you
Shawn Pachlhofer
06-07-2015, 1:10 PM
here's one: http://www.flutemasters.com/
Penn State also sold a fluting jig at one time, but I don't see it on their website.
Dwight Rutherford
06-07-2015, 1:35 PM
It is pretty easy to make a sled to hold a die grinder, Dremel or trim router for fluting. Inexpensive also.
Tony Rozendaal
06-07-2015, 5:31 PM
here's one: http://www.flutemasters.com/
Penn State also sold a fluting jig at one time, but I don't see it on their website.
Here it is...
http://www.pennstateind.com/store/LIXGA2.html
I thought I had seen it recently. Sometimes PSI's website can be difficult to navigate.
Marvin Hasenak
06-07-2015, 6:08 PM
After having used the Flutemaster, the PSI version and some homemade versions including my own, I bought the Flutemaster. For my uses it was the best design, easiest to use and the price was right.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.