PDA

View Full Version : Trotec 400 arrived.



Neville Stewart
06-06-2015, 5:24 PM
Well after some serious manhandling, I got the 400 into the shop and uncreated. Fantastic crating and packing job Trotec. I think this is one piece of gear that I will read every word on the instruction manual :). Thanks for all the advice while I was shopping. Sorry for the side view.
On another note, this might amuse you :http://youtu.be/_E06OQ3H0Hw
315163

Steve Kinnaird
06-06-2015, 5:37 PM
Drones are going to be very useful as the are continually developed.

Bob Davis - Sturgis SD
06-06-2015, 7:53 PM
Well after some serious manhandling, I got the 400 into the shop and uncreated. Fantastic crating and packing job Trotec. I think this is one piece of gear that I will read every word on the instruction manual :). Thanks for all the advice while I was shopping. Sorry for the side view. On another note, this might amuse you :http://youtu.be/_E06OQ3H0Hw <img src="http://www.sawmillcreek.org/attachment.php?attachmentid=315163"/>

Congratulations on the new machine. How did you get it off the pallet in the shop? I used a pair of handyman jacks, kinda scary but it worked.

Bob

Neville Stewart
06-07-2015, 1:05 AM
Hi Bob, I used 2x4 to lift each side and remove the stacked blocks it sat on, then rolled it off the lower deck. I had already dismantled the feet under the deck. It took some work I will say.

Keith Winter
06-07-2015, 12:45 PM
Very nice Neville! I'm a bit jealous! I'm waiting on my speedy 400 to come in. Have fun!

Neville Stewart
06-07-2015, 1:01 PM
No need to be jealous then Keith. Drop me a line if you have any q's about getting it into your shop and out of the crate.

Scott Shepherd
06-07-2015, 1:34 PM
That's exciting Neville! That machine is a beast. I can't wait for you to get it running and start sharing your progress.

Neville Stewart
06-07-2015, 1:50 PM
Thank you Scott, yes I'm pretty happy about it :-). Thank you for your opinions, they did help me come to my decision.