John Bion
06-01-2015, 9:20 AM
Hi Gang,
Just thought I would mention that I ordered some parts from Weike middle of last week, these were just belts etc. Lucy threw in some pulleys at no charge and the whole lot arrived this morning; not bad all the way from China to England. I give them credit for this. I might also mention that I saw some machines by another Chinese manufacturer this last week, and although I do not know the quality of the electronics workmanship, I was not impressed with the cabinetry/welding/panels/paint job and bodge fixit jobs; my two Weikes leave these poor machines eating dust.
This morning I ran down to HPC in Halifax and was cheerfully met and quickly dealt with, walking out with parts as needed, sparing me valuable time (even though the parts were for machines they did not supply). Thanks to Mathew and Chris. - NB: the poor machines mentioned above were not from HPC - I repeat NOT from HPC!
Kind regards, John
Just thought I would mention that I ordered some parts from Weike middle of last week, these were just belts etc. Lucy threw in some pulleys at no charge and the whole lot arrived this morning; not bad all the way from China to England. I give them credit for this. I might also mention that I saw some machines by another Chinese manufacturer this last week, and although I do not know the quality of the electronics workmanship, I was not impressed with the cabinetry/welding/panels/paint job and bodge fixit jobs; my two Weikes leave these poor machines eating dust.
This morning I ran down to HPC in Halifax and was cheerfully met and quickly dealt with, walking out with parts as needed, sparing me valuable time (even though the parts were for machines they did not supply). Thanks to Mathew and Chris. - NB: the poor machines mentioned above were not from HPC - I repeat NOT from HPC!
Kind regards, John