Robert Tepper
05-25-2015, 8:41 PM
I finally broke down and purchased a rotary attachment. I have a few questions and I hope someone can help. On the left side of the rotary there is a sliding protractor, is this to level the glass or bottle?
Do most of you use painters tape to test the engraving before putting a wet paper towel down and engraving.
The few wine glasses that I attempted this weekend had a taper to them. I found that they engraved less deep at the top and radius of the glass. What do you use to give a contrasting color to the engraved area?
Any tips would be greatly appreciated.
Thank you,
Robert
Do most of you use painters tape to test the engraving before putting a wet paper towel down and engraving.
The few wine glasses that I attempted this weekend had a taper to them. I found that they engraved less deep at the top and radius of the glass. What do you use to give a contrasting color to the engraved area?
Any tips would be greatly appreciated.
Thank you,
Robert