Kenneth Reidy
05-24-2015, 1:12 PM
Hi Everyone,
I have a 10" pro cabinet stop saw. I was switching to a dado set up and the arbor assembly started pivoting when pushed either up or down. This was not related to the elevation adjustments. I'll call Stop Saw in the morning but am hoping to solve the problem prior to then.
Thanks,
Ken
Albuquerque
I have a 10" pro cabinet stop saw. I was switching to a dado set up and the arbor assembly started pivoting when pushed either up or down. This was not related to the elevation adjustments. I'll call Stop Saw in the morning but am hoping to solve the problem prior to then.
Thanks,
Ken
Albuquerque