Rick Edwardson
05-22-2015, 12:55 PM
Long-time lurker, infrequent poster here. Just thought I'd share my most recent turning. This walnut burl comes from a walnut orchard in the Central Valley of California. Got it from a friend who got some scraps from the owner of the orchard. I was going to go all natural edge, and turned the outside accordingly. But turning the inside, I couldn’t get clean cuts on the inside of the spikeys, one broke, and I kept hitting my fingers (ouch). I'm not so good at turning mostly air at this point. So I ended up turning them off, leaving a little natural edge for a rustic look. Sanded to 600 grit, burnished with shavings, and finished with multiple coats of gloss wipe-on poly. Measures around 6" x 3".
314035314037314040314038314036314039
314035314037314040314038314036314039