Parts for Performax 16-32

[Chip Byrd]

I picked up an older Performax 16-32 last year. (It is the gray one with a 2 1/2" dust port). I only paid $150 for it, but It has worked like a champ. Recently, however, I blew out the bushing on the outfeed roller.

Does anyone one know if the Jet 16-32 part would work? I don't have a parts diagram for the Performax, but the Jet looks identical at this point.

Thanks,
Chip

[roger wiegand]

vintagemachinery.org has the diagram and parts list for this machine. For bearings and bushings I usually just take the part to a local bearing shop and have them give me a matching part (often of better quality than the originals).

[Chip Byrd]

Thanks, that was super helpful.