Delta " Deluxe Jointer Manual

[Carroll Courtney]

Guys I pick up a 37-190 6" deluxe jointer(deluxe?)Anyway,I took it apart and just gave it a good cleaning.I assemble the fence but there a 3 rings on it that needs to be adjusted by rotating them.I want to square the fence up but I need a manual to figure out how to set it up,so was wondering if someone here has one on file that they could email me or to a website that has info on how to setup the jointer.I did find some diagrams of the parts but that's it.I went to Delta's site and it only shows a bench top jointer.I did ask Mr.Goggle but it only takes me to Sears,any help or directions thanks for the help-----Carroll
Man who should have gotten manual first before taking it apart

[Jerry Thompson]

http://www.mikestools.com/Delta-Jointer-Owner's-Manuals.aspx

This might be the one.
Jerry

[Dustin Brown]

Here's the link to the manual: https://www.google.com/url?sa=t&source=web&rct=j&q=delta%2037-190%20manual&ei=APZHVZvmC4HjsAWcvYFI&url=http://www.mikestools.com/download/Delta-Jointer-Owners-manuals/37-190%2520Type%25203.pdf&ved=0CB0QFjAA&sqi=2&usg=AFQjCNH730vHmH8MCPFxafiWPGdbLo6kiA

Only works with the google redirect.

Which rings are you referring to? Looking at the manual I take it you are talking about the ring that has an indentation to quickly go back to square. If so, there should be an allen head locking screw on it. You loosen the screw while the indented part is mated with the pull knob, then square the fence and tighten the set screw. If not what you're talking about can you post a pic?

Edit: or follow Jerry's link to the manuals page.

[Carroll Courtney]

Fantastic​,thanks guys for the help