Tim Walters
05-01-2015, 8:27 PM
Hi All,
After reading all the good words about these lasers, mine arrived today. However, not a single scrap of documentation was included. I assume that the electrical connections are the small screws on the sides of the end-pieces. The rear mirror assembly is enclosed by a plastic cap. I assume here that I'm supposed to pull this off to get to the connection screw. Also, from what I can find on the net, the max current should be 26ma.
Can anyone confirm any of this? Any additional info or links to documentation would be GREATLY appreciated.
Thanks much!
Tim
After reading all the good words about these lasers, mine arrived today. However, not a single scrap of documentation was included. I assume that the electrical connections are the small screws on the sides of the end-pieces. The rear mirror assembly is enclosed by a plastic cap. I assume here that I'm supposed to pull this off to get to the connection screw. Also, from what I can find on the net, the max current should be 26ma.
Can anyone confirm any of this? Any additional info or links to documentation would be GREATLY appreciated.
Thanks much!
Tim