Roland Camm 2 PNC-2000

[Mandy Green]

A few years ago I bought a Roland PNC-2000, after messing around with it for a while, and having no success in figuring out how it worked, it became a nice paper weight. I installed Dr. Engrave on an old computer, that seems simple enough to figure out, but it's the settings on the machine its self that leave me scratching my head. I searched, then and now, for a manual but I couldn't track anything down. I was wondering if anyone has experience with this machine or could have some leads on where I could purchase a manual.

[Brian Leavitt]

I don't know if this will help you or not, but I found a manual for a PNC-2300.
http://www.e-engraving.com/machines/roland/pdf/Roland_PNC-2300_Users_Manual.pdf

[Mandy Green]

Thanks Brian, I did find that manual the first time I searched, it did cover a few things but there seemed to be a lot of changes between those models.