Help with a couple of logos ***desperate***

[greg lindsey]

Hi fellow creekers,
I need to find a Vassar logo and a Marines logo (USMC with the rope border) for a plaque I'm donating to a retiring Marine, if anyone can help with this it would be greatly appreciated. I need the logo to finish and overnite to the soldier.
Thanks for any help you can give

[Chris DeGerolamo]

http://en.wikipedia.org/wiki/United_States_Marine_Corps#/media/File:USMC_logo.svg (most of the work is done on this one.)

[Mark Sipes]

Color ..... B&W Jpg for sublimation. eps for vector What format, what media ?

[Tony Lenkic]

Greg,

Marine corp you can download from this site............http://www.defense.gov/multimedia/web_graphics/

[greg lindsey]

no color, just engraved on a wooded plaque, thanks for the help so far...you guys rock

[Brian Leavitt]

Here are a couple for the USMC. The ones I use say "Department of the Navy" at the top.

[Kev Williams]

There's nothing wrong with the Vassar logo that you posted--

I copied it, pasted it into Corel Paint, then resampled it 122% larger 4 times--

The put it in the Image Adjustment lab, turned the brightness down a bit, and the contrast up a bit-
this darkened and sharpened it up-

I then copied it, and pasted it into Corel- Clicked the BITMAPS tab, then clicked "resample",
and changed the resolution to 500 (it was 96)-- this smooths the edges some-

Then I engraved it onto a piece of paper in halftone mode, 50% black. It was engraving
as I was typing this- it's a little light on the left side, but I had the power down, didn't
want to burn thru it. It's just under 7" in diameter, it would look good in wood--
311587

[John Stevenson]

Vassar brought into V-Carve pro, converted from bitmap to vector and saved as a DXF.

http://www.stevenson-engineers.co.uk/files/vassar.jpg

DXF file here.

http://www.stevenson-engineers.co.uk/files/vassar.dxf

[Bert Kemp]

please use corel 9 or lower


Here are a couple for the USMC. The ones I use say "Department of the Navy" at the top.

[Bruce Volden]

please use corel 9 or lower


I agree! I am one of those who still use CD 11. Certainly can't help much anymore when I can't open the "newer" versions of Corel.

Bruce

[Dan Hintz]

please use corel 9 or lower

Holy cow, Bert, v9?! That was released before the turn of the century.

[Brian Leavitt]

please use corel 9 or lower
I used X6 because his signature listed X6. I use X7 and it won't save below version 11.

[Bert Kemp]

Dan I have x5 but I'm always asked to save it in 9 because other people can't open it.
and I couldn't open this one with x5

Holy cow, Bert, v9?! That was released before the turn of the century.