old iron bandsaw blade tension

[Kevin Jenness]

I am considering getting a carbide blade for my 36" Crescent, but unsure how much force I can generate on it for blade tension. I have run a 1" carbon steel blade on it in the past with decent results. Has anyone with the same or similar saw successfully used a 3/4" or 1" carbide blade for resawing in the 6-10" height range?

[peter gagliardi]

I run a 36" Tanny, and a 30" Yates, and there is no problem tensioning them. That size Crescent should be plenty stout.

[David Kumm]

If the tension mechanism is intact and spring is good you will tension way past the 25-30,000 psi needed for a Trimaster. My 1936 Oliver 217 can do it easily. Dave310165310166