Mark Clemmens
03-20-2015, 4:24 PM
I have a project that I'm working on, it's a buffet/sideboard that I designed in such a way that the door rails and only 1.5" (3/4" thick) as opposed to the standard 2-2.25" wide rail/stile. I was planning on changing the design slightly to make the rails 2" wide so that I can use euro/cup hinges, when I discovered that Blum makes "mini" euro hinges. They use a 26mm hole as opposed to the usual 35mm.
Here is the link: http://www.hardwaresource.com/hinges/cabinet-hinges/blum-european-hinges-grass-european-hinges/standard-european-style-hinges/blum-mini-hinges-26mm
I will be using both inset and full overlay hinges in my application. I wanted to see if I could get some feedback from anybody who has used these mini hinges. Are there any downsides that you have discovered? Use, longevity, installation, quality, etc. Thanks a bunch.
-Mark
Here is the link: http://www.hardwaresource.com/hinges/cabinet-hinges/blum-european-hinges-grass-european-hinges/standard-european-style-hinges/blum-mini-hinges-26mm
I will be using both inset and full overlay hinges in my application. I wanted to see if I could get some feedback from anybody who has used these mini hinges. Are there any downsides that you have discovered? Use, longevity, installation, quality, etc. Thanks a bunch.
-Mark