Rick Schubert
08-01-2005, 10:19 AM
I'm making a extension table for my TS out of 3/4 plywood and laminating the top. Frame will be oak.
I've read about the importance to also laminate the bottom and sides of the plywood to prevent warping. But could I use an oil based primer and a couple coats of oil based paint instead to seal it?
Seems like it would be alot easier.
Rick
I've read about the importance to also laminate the bottom and sides of the plywood to prevent warping. But could I use an oil based primer and a couple coats of oil based paint instead to seal it?
Seems like it would be alot easier.
Rick