Mike Schuch
02-26-2015, 4:11 PM
My father built this many years ago for his router table. It is a very simple but effective design.
307922
307923
307924
The fence consists of an Aluminum extrusion that he cut in half. A piece of angle iron. A sacrificial UHML fence. A couple of toggle clamps for securing the fence to the table top.
The T slots in the aluminum extrusion makes it very quick and easy to adjust the opening on the fence. The toggle clamps make the fence very quick and easy to adjust on the table. He cut off a standard shop vac attachment that he mounted behind the fence for dust collection.
307922
307923
307924
The fence consists of an Aluminum extrusion that he cut in half. A piece of angle iron. A sacrificial UHML fence. A couple of toggle clamps for securing the fence to the table top.
The T slots in the aluminum extrusion makes it very quick and easy to adjust the opening on the fence. The toggle clamps make the fence very quick and easy to adjust on the table. He cut off a standard shop vac attachment that he mounted behind the fence for dust collection.