View Full Version : Template guide for Dewalt 611pk
Jeff H Lee
02-23-2015, 10:32 AM
Please advise which manufacturers template guide set would fit the Dewalt 611PK router set? Tks
George Bokros
02-23-2015, 11:05 AM
I believe it uses standard Porter Cable guide bushings.
Jeff H Lee
02-23-2015, 1:30 PM
I believe it uses standard Porter Cable guide bushings.
It looks like you are right. The center hole of plunge base plate is 1 3/16 but the center hole of the D shaped fixed base plate is 1 1/2 . So either have to buy a round plate .
Tks
Bill Huber
02-23-2015, 2:05 PM
The PC bushing are correct, I have a set and use them in my 611 all the time.
I didn't have to buy anything, the base in the plunge base worked just fine. I don't know why you would need a bushing in the fixed base.
George Bokros
02-23-2015, 2:15 PM
The PC bushing are correct, I have a set and use them in my 611 all the time.
I didn't have to buy anything, the base in the plunge base worked just fine. I don't know why you would need a bushing in the fixed base.
I agree with Bill, I see no reason you would use a bushing in the fixed base.
Jeff H Lee
02-23-2015, 9:36 PM
You are both correct . No need for bushing in fixed base. Tks
pat warner
02-23-2015, 10:24 PM
"You are both correct . No need for bushing in fixed base. Tks "
********************************************
& why is that?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.