Template guide for Dewalt 611pk

[Jeff H Lee]

Please advise which manufacturers template guide set would fit the Dewalt 611PK router set? Tks

[George Bokros]

I believe it uses standard Porter Cable guide bushings.

[Jeff H Lee]

I believe it uses standard Porter Cable guide bushings.

It looks like you are right. The center hole of plunge base plate is 1 3/16 but the center hole of the D shaped fixed base plate is 1 1/2 . So either have to buy a round plate .

Tks

[Bill Huber]

The PC bushing are correct, I have a set and use them in my 611 all the time.

I didn't have to buy anything, the base in the plunge base worked just fine. I don't know why you would need a bushing in the fixed base.

[George Bokros]

The PC bushing are correct, I have a set and use them in my 611 all the time.

I didn't have to buy anything, the base in the plunge base worked just fine. I don't know why you would need a bushing in the fixed base.

I agree with Bill, I see no reason you would use a bushing in the fixed base.

[Jeff H Lee]

You are both correct . No need for bushing in fixed base. Tks

[pat warner]

"You are both correct . No need for bushing in fixed base. Tks "
********************************************
& why is that?