Andy Glass
02-17-2015, 12:44 PM
I filmed the build on my YouTube Channel. Please check it out! http://youtu.be/qDOujXINlE0
Typical washer and dryers are lower to the ground. You can buy stands for each unit for around $150-250. I decided to build mine and incorporate stylish hardware, larger drawers, classy hutch, and a special detergent feature.
The build consists of MDF, Poplar face frames, brushed nickel hardware, full extension drawer slides, Oil based primer, and white paint.
Primary construction method was rabbits, glue, brad nails, conformat screws, pocket screws for the face frame.
If you have any more comments, questions or suggestions please leave them here or on YouTube.
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/Washer%20Dryer%20Stand%20Title%20Picture.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/Washer%20Dryer%20Stand%20Title%20Picture.jpg.html)
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/IMG_0447.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/IMG_0447.jpg.html)
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/IMG_0452.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/IMG_0452.jpg.html)
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/IMG_0448.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/IMG_0448.jpg.html)
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/IMG_0449.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/IMG_0449.jpg.html)
Typical washer and dryers are lower to the ground. You can buy stands for each unit for around $150-250. I decided to build mine and incorporate stylish hardware, larger drawers, classy hutch, and a special detergent feature.
The build consists of MDF, Poplar face frames, brushed nickel hardware, full extension drawer slides, Oil based primer, and white paint.
Primary construction method was rabbits, glue, brad nails, conformat screws, pocket screws for the face frame.
If you have any more comments, questions or suggestions please leave them here or on YouTube.
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/Washer%20Dryer%20Stand%20Title%20Picture.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/Washer%20Dryer%20Stand%20Title%20Picture.jpg.html)
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/IMG_0447.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/IMG_0447.jpg.html)
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/IMG_0452.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/IMG_0452.jpg.html)
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/IMG_0448.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/IMG_0448.jpg.html)
http://i48.photobucket.com/albums/f218/Pbmaster11/Washer%20Dryer%20Stand/IMG_0449.jpg (http://s48.photobucket.com/user/Pbmaster11/media/Washer%20Dryer%20Stand/IMG_0449.jpg.html)