Wakahisa Shinta
02-11-2015, 4:36 PM
I recently bought a used Sjobergs Elite workbench with SM04 cupboard (http://www.sjobergs.se/en/products/professional/index.php?id=1043&cat=16&lang=en&artnr=33464) included. The cupboard drawers aren't smooth because the sides contact the carcass half way through its travel. All of them can't be closed completely because the front overlap each other by about 1/16". The middle section's doors also overlap in the middle; maybe 1/4".
306694
I've disassembled the cupboard and moved the two middle panel dividers further apart. This reduced the doors overlap to about 1/16". The hinge's width adjustment screws are back out all the way.
306695 306696
To Sjoberg's bench and cupboard owners: Did you experience these problems? Your solutions?
I will be tackling the drawer binding problem after this is fixed.
306694
I've disassembled the cupboard and moved the two middle panel dividers further apart. This reduced the doors overlap to about 1/16". The hinge's width adjustment screws are back out all the way.
306695 306696
To Sjoberg's bench and cupboard owners: Did you experience these problems? Your solutions?
I will be tackling the drawer binding problem after this is fixed.