View Full Version : magnet and acrylic cutting at the same time am I crazy
Mark La Tourette
02-11-2015, 1:09 PM
Does anyone out there place the adhesive magnet back on the acrylic then laser cut it with a nice clean edge? Also part 2 what does everyone use to clean there acrylic off with after cutting? we use soap and water everything else seams to crack the acrylic. HELp please
John Frazee
02-11-2015, 2:50 PM
If you are talking about making nametags, I laser from a sheet of stock, cut out with laser and then clean with a magic eraser and dishsoap. I then apply the magnetic backing.
Joe Pelonio
02-11-2015, 7:39 PM
I never have had to clean acrylic, I apply transfer tape to the front before cutting then peel it when done and it's good as new. Magnetic sheet does not cut cleanly even by itself, I wouldn't try to cut it after it's stuck onto the acrylic. For the cleanest edge, cut only 1/2 way then bend to break.
Clark Pace
02-12-2015, 12:31 AM
I have cut magnet stuff, and it was not clean for me. Left residue.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.