Unisaw extension wing cabinet.

[Bart Leetch]

Right now it not under the extension & it may not get there. Its real handy to set things on.

Anyway here is that cabinet I've made before final sanding & finish. The top drawer holds wrenches triangles & miscellaneous small items for the Table-saw. The 2nd drawer holds gripper parts & other push shoes & sticks & a dial indicator & tips & mag base. The 3rd drawer holds router table stuff & bits. The 4th drawer hold saw blades & Grippers.

[John Dingman]

Nicely Done Bart!

I have been waiting to see this as I have been meaning to make one for mine and I was looking for ideas. Thanks for posting. I would like to see the drawer lay-out once you have everything in place. Keep up the good work!

John

[Don Baer]

Bart;
I made a similar one some time back and have found it to be a very usefull addition to the shop. I't makes it a lot easier to handle large flat stock when ripping on my TS and also make a good spot to do small piece assemblies.