Max Neu
02-06-2015, 6:28 PM
I posted a while back asking about a blade choice for cutting veneer with a table saw,and some of the members here were interested in seeing this jig once I got it,so I thought I would share some pictures of it,along with some other new items I recently got.306287306288Here is the MVT in the closed position.
306289306290I had some scrap Ziracote,so I made this little design.The MVT makes this kind of work quick and easy.
306291Here is the Virutex veneer cutter,sort of like a papercutter on steroids.
306292This is a Veritas string cutter,works good for small runs.Next time I need to make stringing,I am going to try it on the MVT.
306294Here is the flip top press,this really makes life good for veneering.I ended up getting the 4'x10',I am glad I got the 10',it has come in really handy lately when I need something over 8' that I can't get out of a sheet of plywood.
306289306290I had some scrap Ziracote,so I made this little design.The MVT makes this kind of work quick and easy.
306291Here is the Virutex veneer cutter,sort of like a papercutter on steroids.
306292This is a Veritas string cutter,works good for small runs.Next time I need to make stringing,I am going to try it on the MVT.
306294Here is the flip top press,this really makes life good for veneering.I ended up getting the 4'x10',I am glad I got the 10',it has come in really handy lately when I need something over 8' that I can't get out of a sheet of plywood.