stan kern
02-02-2015, 9:34 PM
http://youtu.be/LXiIw79O_ys
the mdf panels are starting to look pretty good,this one took 39 min cnc time and 3 bits 1/4 ball 1/8 ball and 1/4 endmill
Kept the feed about 140 in/min to 124in/min
quite pleased with the results
the mdf panels are starting to look pretty good,this one took 39 min cnc time and 3 bits 1/4 ball 1/8 ball and 1/4 endmill
Kept the feed about 140 in/min to 124in/min
quite pleased with the results