Leo Van Der Loo
01-25-2015, 12:46 AM
Rough turned this piece of crotch wood in 2006 and let it sit and dry, finally returned it late last summer and it had bowed enough that I lost the recess after turning the top side flat and then the bottom side.
So I picked a small block of dry Mulberry and glued that onto the bottom, turned it round and again set it away to do some other stuff.
A couple of weeks ago I picked it up again and found that it had moved a bit more, so returned the top side and the rim and finished that, after a few coats I stuck it in the Mega Jumbo taws and returned the bottom side and then removed the block.
Brought it inside and wiped a coat of finish on it and promptly forgot to wipe the finish off again :rolleyes:, so now It sits here with a thick layer on it, slowly getting hard, probably have to sand it all off and redo it, but I will first try to sand it just smooth, maybe that will work, if not it will just take some more sanding, which I hate to have to do :mad:
305029 305028 305030
305031 305032 305033 305034
So I picked a small block of dry Mulberry and glued that onto the bottom, turned it round and again set it away to do some other stuff.
A couple of weeks ago I picked it up again and found that it had moved a bit more, so returned the top side and the rim and finished that, after a few coats I stuck it in the Mega Jumbo taws and returned the bottom side and then removed the block.
Brought it inside and wiped a coat of finish on it and promptly forgot to wipe the finish off again :rolleyes:, so now It sits here with a thick layer on it, slowly getting hard, probably have to sand it all off and redo it, but I will first try to sand it just smooth, maybe that will work, if not it will just take some more sanding, which I hate to have to do :mad:
305029 305028 305030
305031 305032 305033 305034