Stacked blanks for bowl turning?

[Jeffrey Cole]

I need some help. I saw a thread here that referenced an article on how to cut circles on a 45° and cut them out with a scroll saw. Then stack and glue them to turn a bowl. I need to find that article as I would like to try this operation. any help would be wonderful.:confused:
Thanks in advance!!!
Jeffrey

[Roger Chandler]

It sounds to me like is a bowl from a board technique.....Michelle Richards has done several and I think has a tutorial somewhere on this. Good Luck!

[Jeffrey Cole]

Roger, that is what it is. I just can not find the article on how to do it.
Jeffrey

[Dan Hintz]

Google "Bowl from board" and you'll quite a slew of articles, many in pdf format (or you can add "filetype: pdf" to your search and get just those).

[allen thunem]

try this
http://www.bing.com/videos/search?q=youtube+bowl+from+a+board&FORM=VIRE10#view=detail&mid=F272209A27126D4B7FDBF272209A27126D4B7FDB

[Jeffrey Cole]

Thanks for all your help!!! This should be enough to get me started.
Thanks again,
Jeffrey

[Lloyd Butler]

If you draw out the profile you hope to get, you can plan the cuts on the individual rings so that you do not need to have a cone shaped bowl. The starting material should be a bit thicker, but then you should be able to get a more "bowly" shape.