Carrol Fleming
01-22-2015, 8:52 AM
I have tried a search but get all sorts of stuff and my bran is now full!
My Epilog Helix Mini 24 is driving me up the wall. I have a job that I have used, unchanged, for a few years now and suddenly the engraver is engraving it as a solid black box.
After the problem showed up I did the following:
Converted my DAT files
Updated the print drivers
Installed the Job Manager - that will save me so much time!!
Tried to set the engraver up, again, on my 64bit computer to frustrating results (another problem for another day)
I used to use an ethernet cable but I suspect my network card has gone so I now use the USB cable, and have for a year at least. This is my only 32bit computer so I only use it, via Team Viewer, for the laser - nothing else!
The piece is 600mm x 300mm
If I change the Piece Size in the Print Properties to 590 x 300 it will print.
I have done nothing to the computer or engraver prior to this happening. This computer is used for nothing but CorelDraw and the engraver.
Any ideas would be very gratefully received!
Carrol
My Epilog Helix Mini 24 is driving me up the wall. I have a job that I have used, unchanged, for a few years now and suddenly the engraver is engraving it as a solid black box.
After the problem showed up I did the following:
Converted my DAT files
Updated the print drivers
Installed the Job Manager - that will save me so much time!!
Tried to set the engraver up, again, on my 64bit computer to frustrating results (another problem for another day)
I used to use an ethernet cable but I suspect my network card has gone so I now use the USB cable, and have for a year at least. This is my only 32bit computer so I only use it, via Team Viewer, for the laser - nothing else!
The piece is 600mm x 300mm
If I change the Piece Size in the Print Properties to 590 x 300 it will print.
I have done nothing to the computer or engraver prior to this happening. This computer is used for nothing but CorelDraw and the engraver.
Any ideas would be very gratefully received!
Carrol