View Full Version : Had a hard time pulling the trigger...
Keith Pleas
01-07-2015, 10:57 PM
...on this piece of teak I've had for around 15 years. It's a little over 13' long, 9.5" wide, and about 1.25" thick. I actually have 2 of them.
But I've arrived at the point of our bathroom remodel where everything else is done and now it's my turn to do all the the remaining woodwork . Window shutters, bench, various trim, shower ledge, shelves...
Well, at least I can comfort myself that it's going to a good home (mine!).
303690
Don Orr
01-08-2015, 10:00 AM
I feel ya man. Tough to cut up those special pieces.
Larry Edgerton
01-08-2015, 12:30 PM
I have had a 2" thick Zebrawood plank for 20 years that I have not found the perfect use for. Also a 42" wide Jatoba 6/4 that I have been saving for my own desk. Still no desk......
Pat Barry
01-08-2015, 12:51 PM
303690
Noooooooooooooooooooooooo! Don't cut it there!
just kidding
mreza Salav
01-08-2015, 1:34 PM
I feel you. I have a few 12'+ boards of Honduras mahogany, 2.25" thick and 14"-18" wide that I have saved for a dining room table or something that can appreciate the size of the board.
Have a tough time cutting it...
Mike Sniedze
01-08-2015, 4:37 PM
I think james Krenov said it best ..." If you have a 12 foot plank, you are likely to cut it into two 6 foot pieces, what happens later when you get a seven foot idea?".
Keith Pleas
01-17-2015, 4:32 PM
I think james Krenov said it best ..." If you have a 12 foot plank, you are likely to cut it into two 6 foot pieces, what happens later when you get a seven foot idea?".
I loved the Krenov books when I read them 30 years ago. I should look for them again.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.