Screw Eyes / Eye Screws

[George Bokros]

Looking for some black screw eyes / eye screws to hang a piece of stained glass from the ceiling. I have googled and am not finding anything. I know I could paint them but I preferred either a black oxide or black powder coated screw eyes.

Anyone have any ideas for a source?

Thanks

[george newbury]

Will eye bolts do?
http://www.1st-chainsupply.com/cgi-bin/commerce.cgi?search=action&category=BKEB

or
http://www.barndoorhardware.com/barn-door-hardware/gate-hardware/

http://www.barndoorhardware.com/obscure/wp-content/uploads/2010/04/chain-eye.jpg

[George Bokros]

Thanks for the response George. Probably a little heavier duty than would look good in my application.

[Myk Rian]

Then your options are limited to either heavy duty, or a large eye.

[Perry Holbrook]

If you have a plumbers propane torch, you can blacken steel screws by heating them to cherry red. I do it all the time. Works with stainless as well. Also brass plated ones.

Perry

[George Bokros]

If you have a plumbers propane torch, you can blacken steel screws by heating them to cherry red. I do it all the time. Works with stainless as well. Also brass plated ones.

Perry

May give this a try. How durable is the blackening? My application will not see much abuse.

[Perry Holbrook]

Just spray a clear coat of something, or even clear finger nail polish.

Perry

[Lonnie Gallaher]

McMaster Carr has these. You would have to blacken them.

http://www.mcmaster.com/#hanger-bolts/=vbsegy