View Full Version : Looking for dust covers for Jointer and bandsaw
Lee Ludden
01-03-2015, 11:17 AM
We don't get a lot of rain here in Phoenix, but we get some. With the layout of my tools, I get water dripping from the garage door onto my 8" jointer and my bandsaw. I've been using tarps to cover them, but I'd like to find a more fitted cover. Any suggestions?
Thanks
Keith Hankins
01-03-2015, 11:49 AM
HTC makes a cover that is water-resistant, but not waterproof so they can breathe. Kinda like a wind breaker.
http://www.woodcraft.com/Product/143841/Jumbo-Power-Tool-Machine-Cover-72-x-112.aspx
Carroll Courtney
01-03-2015, 11:57 AM
Don't know if it rains that much in Ariz but if it was me I just go down and buy the very thin plastic sheets that painters use to cover up windows etc when spraying paint.Its thin/cheap.And its also made in thicker sheets such as 6mil.Just an ideal
Brian Deakin
01-03-2015, 3:30 PM
I have been using a HTC covers for 10 years and have had excellent sucess with them They are however as Keith states
...... water-resistant, but not waterproof so they can breathe
so you will need to ressolve the dripping water first
but in terms of preventing the formation of rust I have found them to be well worth the money
to save money further you could consider purchasing a larger HTC cover and cutting it into two pieces if appropriate
I only cover the table of my band saw with a piece of HTC cover cut from a larger sheeet and that has worked fine
regards Brian
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.