Jeff D

[Mark Bolton]

Sorry for the call-out but Ive been wondering how your new shop/move has been panning out. Any info? Photos? Hope its serving you well.

[Jeff Duncan]

Thanks for asking!

I moved into the new digs back in July and spent the subsequent 10 weeks or so getting everything set up. Wiring up a full shop alone was quite the undertaking! Plus the 3 phase in the new shop is just a bit different than the old coming in at 208v, so had to figure that out the hard way on a couple machines. I went back to work in September and am mostly operational. Still have a couple machines running on extension cords and a couple that need dust hookups, just ran out of time and money! Hoping to catch up over the winter and do a second round of shop projects in the spring. I have to upload some pics of the new place so i'll post back a bit later.

JeffD

[Mark Bolton]

Good to hear. I knew you were long into the project but had just begun to see you more frequently (coulda been me). Figured you were either covered up with work or still plowing away at it.

Ciao!