View Full Version : Fast & Precise Hand Cut ( Nakashima Style ) Butterflies
Dale Osowski
01-01-2015, 9:29 AM
I decided to make this post from yesterday into an album so I can easily share a link to it on woodworking forums: https://www.facebook.com/media/set/?set=a.10152988155241683.1073741871.126415221682&type=1
I hope some find it helpful.
Matt Day
01-01-2015, 1:07 PM
Would it be too much trouble to post it on a photo hosting site? You need a Facebook account to view your album, which I don't have. Thanks
Dale Osowski
01-01-2015, 1:21 PM
How's this:
All work is done at the bench vise.
303131
I use Masonite guides to protect the bench surface from the saw. Differing layers of double sided tape will provide a slight taper to finished butterfly.
303132
I clamp the work piece in the vice keeping my paper guide flush to the top of vice.
303133
Sawing.
303134
Aligning the wing cuts.
303135
More sawing.
303136
Waste is removed.
303137
The slight taper created by layering of tape.
303138
Larry Edgerton
01-01-2015, 1:34 PM
Thanks. Larry
Dale Osowski
01-01-2015, 1:35 PM
Continued:
Doesn't get much easier than that. :)
303141
Use the same process for more complicated designs.
303142
Jim Becker
01-02-2015, 10:29 AM
Thanks for posting this here, Dale! This is something you are truly a master at...
Dale Osowski
01-02-2015, 10:34 AM
Thanks Jim, I appreciate the comment :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.