Matt Evans
01-01-2015, 8:44 AM
Haven't posted much for a long time, but figured id try to start out by posting a few of the more used jigs and fixtures I've made over the past couple years.
This one is a a straight line jig for the table saw. A few simple hold downs and a straight wide board are all you need to make one. If your saw is set up well enough you can get glue line juts straight off the saw with a well made jig like this.
This one is a a straight line jig for the table saw. A few simple hold downs and a straight wide board are all you need to make one. If your saw is set up well enough you can get glue line juts straight off the saw with a well made jig like this.