Out in the shop 2

[Bart Leetch]

I managed to get the top made & installed on the cabinet for my Unisaw .

Its just 3/4" fir plywood banded with masonite inset.

I know it not worth comment but its going to make working with my Unisaw & router table much nicer & its made to match the rest of the machine cabinets in the shop.

[John Renzetti]

Hi Bart, Are you using this cabinet as an outfeed table also.
take care,
John

[Corey Hallagan]

Looking good Bart! Is this for the router to drop in to or for outfeed?

Corey

[Bart Leetch]

Hi John & Corey

This is just a cabinet to roll under the right hand extension to store router bits, table-saw wrenches a dial indicator & other miscellaneous stuff in. Table-saw blades, Dado sets & Grippers & push sticks in the bottom drawer.

Corey you can see my router table in the left hand wing of my Unisaw it has a M12V Hitachi.

Attached are pictures of my bench/out-feed table.

[John Renzetti]

Hi Bart, Great idea. Lots of added storage space without taking up any needed floor space.
take care,
John

[Corey Hallagan]

I got yah Bart. That will be a nice set up. I am still going to make a movile cabinet for my saw... eventually!! You got a great set up there Bart!

Corey

[Dick Heifner]

Hi Bart,
Do you have any drawings or planes for your router table on your saw?
I'm in the process of building a router table and I would like to see how you did yours.

Dick