PDA

View Full Version : Job Control Software



Roland Morrison
12-01-2014, 8:59 AM
In one thread that I can not find someone mentioned Job Control software for storing jobs that can be retrieved with full setting so it can be repeated. I am using Illustrator and an Epilog laser. What Job Control software would you recommend?

Scott Shepherd
12-01-2014, 9:14 AM
Hi Roland, Job Control programs come with the lasers. Universal uses their own, Trotec uses their own, and Epilog has just started releasing machines with a Job Control program in their Fusion line of machines. I do think I have seen they are doing some version of Job Control for their legacy machines, but I'm not sure which models it works with. You'd have to check with Epilog on that, but I'm not aware of any 3rd party Job Control system that works across platforms.

Tim Bateson
12-01-2014, 9:31 AM
From Epilog: Mini or Helix Laser. Epilog Job Manager 1.2.2 (11/07/14)
Windows 7/8/8.1 is required to use the Epilog Job Manager.

Link: https://www.epiloglaser.com/tech-support/mini-helix-drivers.htm