universal laser m-300

[GARY PENWRIGHT]

does anyone near buffalo ny know how to run one. will be picking up a used one an dont know how to run it. any help. penwright15@gmail.com:(

[Nicolas Silva]

It is quite simple. First, download the necessary printer driver from ULS and install it.
In your control panel select the M300 as a printer.
You can run a test by simply 'printing' a document or drawing to the M300 via the print driver.
Everything after that is the same. No matter what drawing program you choose to use - in the end
you print the document to the 'printer' M300. There are some things you need to learn about
setting the speed and power levels per color but a little playing will take care of that.
ULS actually has a terrible website when it comes to finding documentation or drivers, But you can probably find everything you need at Engravers Network
here: http://www.engraversnetwork.com/support/universal-lasers/

[GARY PENWRIGHT]

thanks every one. up an running. now to learn to do photos in corel draw 6